Subtotal
Taxes are calculated at checkout
Clear Filters
Sort by
S-Works Recon SL Shoe
×
From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard an... Read More
從最近自公路車皈依而來的騎士，到泥土路上的速度之王，新款 S-Works Recon 為礫石和 XC 用途騎乘設計，帶來了源自公路車的性能。在我們的 RETÜL 最適騎姿資料庫中超過十萬筆足部掃描的指引下，我們認知到我們標準和寬版的纖維底板，能夠適合各種人類腳型的分布範圍。內部工字樑結構增加了剛性和強度，無需額外支撐。創造出服貼度，並且堅硬、舒適又具可調性的嶄新鞋款，並讓您充分發揮力量。
從裡到外，S-Works Recon 皆融入了 Body Geometry 人體工學技術。在將近二十年的研發和數據驗證的推動下，我們確保您身體與自行車的接觸點將不存在痛點，而只有性能優勢。藉由我們創造的 Varus Wedge內翻楔形、Longitudinal Arch縱向足弓支撐和 Metatarsal Button蹠骨鈕，使雙腳在踩踏時保持在最佳位置，並與膝蓋和臀部對正。
- 高密度浮台和新墊片使騎士能夠調整踏板介面，以獲得最高效率和類公路車的踏板平台
- 藉由 Varus Wedge內翻楔形、Longitudinal Arch縱向族弓支撐 和 Metatarsal Button 蹠骨鈕體現 Body Geometry 人體工學技術
- 不對稱鞋跟對向支撐內側，同時去除外側的材料，因此產生較低的鞋口。
- 使用內部工字樑結構增加剛性和強度—免去額外支撐的需求，並使車鞋保持極致輕量
- 分布在前後腳掌的區塊加強結構最大化了支撐性，同時新版 BOA® 拉線增進了包覆固定，無需趾端束帶
- Specialized Rider Care 提供額外的 3 mm、6 mm 和 9 mm 浮台墊片，對應不同腿長和卡子墊高。
- 適合更寬的足型，全新底板比標準版寬 4 mm（比 S-Works Recon 登山車鞋寬 8 mm）。
- 44 號重 280 克
S-Works Recon SL Shoe
NT$12,600.00
From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down.
Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips.
- High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform
- Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight
- Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap
- For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes).
- Approximate weight: 280g for a 1/2 pair size, 44
從最近自公路車皈依而來的騎士，到泥土路上的速度之王，新款 S-Works Recon 為礫石和 XC 用途騎乘設計，帶來了源自公路車的性能。在我們的 RETÜL 最適騎姿資料庫中超過十萬筆足部掃描的指引下，我們認知到我們標準和寬版的纖維底板，能夠適合各種人類腳型的分布範圍。內部工字樑結構增加了剛性和強度，無需額外支撐。創造出服貼度，並且堅硬、舒適又具可調性的嶄新鞋款，並讓您充分發揮力量。
從裡到外，S-Works Recon 皆融入了 Body Geometry 人體工學技術。在將近二十年的研發和數據驗證的推動下，我們確保您身體與自行車的接觸點將不存在痛點，而只有性能優勢。藉由我們創造的 Varus Wedge內翻楔形、Longitudinal Arch縱向足弓支撐和 Metatarsal Button蹠骨鈕，使雙腳在踩踏時保持在最佳位置，並與膝蓋和臀部對正。
- 高密度浮台和新墊片使騎士能夠調整踏板介面，以獲得最高效率和類公路車的踏板平台
- 藉由 Varus Wedge內翻楔形、Longitudinal Arch縱向族弓支撐 和 Metatarsal Button 蹠骨鈕體現 Body Geometry 人體工學技術
- 不對稱鞋跟對向支撐內側，同時去除外側的材料，因此產生較低的鞋口。
- 使用內部工字樑結構增加剛性和強度—免去額外支撐的需求，並使車鞋保持極致輕量
- 分布在前後腳掌的區塊加強結構最大化了支撐性，同時新版 BOA® 拉線增進了包覆固定，無需趾端束帶
- Specialized Rider Care 提供額外的 3 mm、6 mm 和 9 mm 浮台墊片，對應不同腿長和卡子墊高。
- 適合更寬的足型，全新底板比標準版寬 4 mm（比 S-Works Recon 登山車鞋寬 8 mm）。
- 44 號重 280 克
S-Works Torch
×
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re... Read More
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re... Read More
S-Works Torch
NT$13,300.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
Recon 3.0 Mountain Bike Shoes
×
KOM/QOM chasers, race podium challengers, and all devotees of speed don’t need to sacrifice comfort, durability, or off-the-bike capability when searching for an efficient race-ready shoe with the scientifically proven performance benefits of B... Read More
KOM/QOM的追求者、比賽凸台的挑戰者和所有速度愛好者在尋找一款具科學實證Body Geometry人體工學設計性能優勢的高效競賽車鞋時，他們不需要犧牲舒適性、耐用性或步行能力。很難找到一雙看起來不錯、感覺很好、既輕便又功能強大的車鞋—嗯，過去確實如此。為您介紹全新 Recon 3.0，與 S-Works同款產品相差不遠的性能：專為速度、耐用性、舒適性所設計，並且比過往款式還要更輕。
Body Geometry人體工學：如同所有Body Geometry車鞋，Recon 3.0採用人體工學設計並經過科學實證，透過專利技術提高舒適度、增進性能並減少每位騎士受傷的機率，同時將功率提高7瓦-這是經過科學驗證。
Stride技術：Stride技術在鞋頭周圍提供可彎曲的外底和鞋面，並結合堅硬的卡子空間，使車鞋在行走時輕鬆彎曲，並在踩踏時保持剛性和高效。
高性能和效率：Recon 3.0直接從我們頂級的 S-Works Recon中提取纜線佈線、Boa旋鈕配置和碳纖底板各項元素。頂級Li2 Boa雙懸鈕提供最佳化的可調整性和貼合度，同時拉線布局確保鎖固的體感，將鞋內的移動範圍限制到最低程度。碳纖底板保持 Recon 3.0的輕量和剛性，適合最佳的踩踏功率輸出，更不用說比上一代減輕了 10克。
Body Geometry人體工學鞋底和鞋墊經過專門設計，並以科學為後盾，透過優化臀部、膝蓋和腳部的排列來增強力量、提高效率並減少受傷的機率。
- 碳纖STRIDE腳趾彎曲技術讓腳趾在離開自行車時仍能自然運動，但在踩踏時保持剛性：硬度指數 10.0
- 完全熔接鞋面減少接縫，提供絕佳的穿入舒適度。
- 獨立 BOA® L6-Snap旋鈕可進行即時微調。
- SlipNot™ 橡膠鞋底紋路可在所有地形上提供可靠的抓地力，並配有可拆卸的腳釘。
- 雙螺栓卡子機構適合所有主流 MTB卡踏。
- 重量約 355克（單腳，尺寸 42）
Recon 3.0 Mountain Bike Shoes
NT$7,300.00
KOM/QOM chasers, race podium challengers, and all devotees of speed don’t need to sacrifice comfort, durability, or off-the-bike capability when searching for an efficient race-ready shoe with the scientifically proven performance benefits of Body Geometry. A shoe that looks good, feels good, and is light yet capable can be hard to find—well, it used to be. Meet the all-new Recon 3.0, a not-so-distant relative to its S-Works counterpart: made for speed, durability, comfort, and now lighter than ever before.
Body Geometry: Like every Body Geometry shoe, the Recon 3.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science.
Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling.
High Performance & Efficiency: The Recon 3.0 pulls its cable routing, Boa dial placement, and carbon plate directly from our halo S-Works Recon. Dual, premium Li2 Boa Dials offer optimized adjustability and fit, while the cable routing ensures a locked-in feel, minimizing movement within the shoe. The carbon plate keeps the Recon 3.0 lightweight and stiff for optimal power output on the pedal, not to mention shaving 10 grams off our previous generation.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA® L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot™ rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 355g (1/2 pair, Size 42)
KOM/QOM的追求者、比賽凸台的挑戰者和所有速度愛好者在尋找一款具科學實證Body Geometry人體工學設計性能優勢的高效競賽車鞋時，他們不需要犧牲舒適性、耐用性或步行能力。很難找到一雙看起來不錯、感覺很好、既輕便又功能強大的車鞋—嗯，過去確實如此。為您介紹全新 Recon 3.0，與 S-Works同款產品相差不遠的性能：專為速度、耐用性、舒適性所設計，並且比過往款式還要更輕。
Body Geometry人體工學：如同所有Body Geometry車鞋，Recon 3.0採用人體工學設計並經過科學實證，透過專利技術提高舒適度、增進性能並減少每位騎士受傷的機率，同時將功率提高7瓦-這是經過科學驗證。
Stride技術：Stride技術在鞋頭周圍提供可彎曲的外底和鞋面，並結合堅硬的卡子空間，使車鞋在行走時輕鬆彎曲，並在踩踏時保持剛性和高效。
高性能和效率：Recon 3.0直接從我們頂級的 S-Works Recon中提取纜線佈線、Boa旋鈕配置和碳纖底板各項元素。頂級Li2 Boa雙懸鈕提供最佳化的可調整性和貼合度，同時拉線布局確保鎖固的體感，將鞋內的移動範圍限制到最低程度。碳纖底板保持 Recon 3.0的輕量和剛性，適合最佳的踩踏功率輸出，更不用說比上一代減輕了 10克。
Body Geometry人體工學鞋底和鞋墊經過專門設計，並以科學為後盾，透過優化臀部、膝蓋和腳部的排列來增強力量、提高效率並減少受傷的機率。
- 碳纖STRIDE腳趾彎曲技術讓腳趾在離開自行車時仍能自然運動，但在踩踏時保持剛性：硬度指數 10.0
- 完全熔接鞋面減少接縫，提供絕佳的穿入舒適度。
- 獨立 BOA® L6-Snap旋鈕可進行即時微調。
- SlipNot™ 橡膠鞋底紋路可在所有地形上提供可靠的抓地力，並配有可拆卸的腳釘。
- 雙螺栓卡子機構適合所有主流 MTB卡踏。
- 重量約 355克（單腳，尺寸 42）
