Subtotal
Taxes are calculated at checkout
Clear Filters
Sort by
S-Works Recon SL Shoe
×
From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard an... Read More
從最近自公路車皈依而來的騎士，到泥土路上的速度之王，新款 S-Works Recon 為礫石和 XC 用途騎乘設計，帶來了源自公路車的性能。在我們的 RETÜL 最適騎姿資料庫中超過十萬筆足部掃描的指引下，我們認知到我們標準和寬版的纖維底板，能夠適合各種人類腳型的分布範圍。內部工字樑結構增加了剛性和強度，無需額外支撐。創造出服貼度，並且堅硬、舒適又具可調性的嶄新鞋款，並讓您充分發揮力量。
從裡到外，S-Works Recon 皆融入了 Body Geometry 人體工學技術。在將近二十年的研發和數據驗證的推動下，我們確保您身體與自行車的接觸點將不存在痛點，而只有性能優勢。藉由我們創造的 Varus Wedge內翻楔形、Longitudinal Arch縱向足弓支撐和 Metatarsal Button蹠骨鈕，使雙腳在踩踏時保持在最佳位置，並與膝蓋和臀部對正。
- 高密度浮台和新墊片使騎士能夠調整踏板介面，以獲得最高效率和類公路車的踏板平台
- 藉由 Varus Wedge內翻楔形、Longitudinal Arch縱向族弓支撐 和 Metatarsal Button 蹠骨鈕體現 Body Geometry 人體工學技術
- 不對稱鞋跟對向支撐內側，同時去除外側的材料，因此產生較低的鞋口。
- 使用內部工字樑結構增加剛性和強度—免去額外支撐的需求，並使車鞋保持極致輕量
- 分布在前後腳掌的區塊加強結構最大化了支撐性，同時新版 BOA® 拉線增進了包覆固定，無需趾端束帶
- Specialized Rider Care 提供額外的 3 mm、6 mm 和 9 mm 浮台墊片，對應不同腿長和卡子墊高。
- 適合更寬的足型，全新底板比標準版寬 4 mm（比 S-Works Recon 登山車鞋寬 8 mm）。
- 44 號重 280 克
S-Works Recon SL Shoe
NT$12,600.00
From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down.
Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips.
- High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform
- Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight
- Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap
- For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes).
- Approximate weight: 280g for a 1/2 pair size, 44
從最近自公路車皈依而來的騎士，到泥土路上的速度之王，新款 S-Works Recon 為礫石和 XC 用途騎乘設計，帶來了源自公路車的性能。在我們的 RETÜL 最適騎姿資料庫中超過十萬筆足部掃描的指引下，我們認知到我們標準和寬版的纖維底板，能夠適合各種人類腳型的分布範圍。內部工字樑結構增加了剛性和強度，無需額外支撐。創造出服貼度，並且堅硬、舒適又具可調性的嶄新鞋款，並讓您充分發揮力量。
從裡到外，S-Works Recon 皆融入了 Body Geometry 人體工學技術。在將近二十年的研發和數據驗證的推動下，我們確保您身體與自行車的接觸點將不存在痛點，而只有性能優勢。藉由我們創造的 Varus Wedge內翻楔形、Longitudinal Arch縱向足弓支撐和 Metatarsal Button蹠骨鈕，使雙腳在踩踏時保持在最佳位置，並與膝蓋和臀部對正。
- 高密度浮台和新墊片使騎士能夠調整踏板介面，以獲得最高效率和類公路車的踏板平台
- 藉由 Varus Wedge內翻楔形、Longitudinal Arch縱向族弓支撐 和 Metatarsal Button 蹠骨鈕體現 Body Geometry 人體工學技術
- 不對稱鞋跟對向支撐內側，同時去除外側的材料，因此產生較低的鞋口。
- 使用內部工字樑結構增加剛性和強度—免去額外支撐的需求，並使車鞋保持極致輕量
- 分布在前後腳掌的區塊加強結構最大化了支撐性，同時新版 BOA® 拉線增進了包覆固定，無需趾端束帶
- Specialized Rider Care 提供額外的 3 mm、6 mm 和 9 mm 浮台墊片，對應不同腿長和卡子墊高。
- 適合更寬的足型，全新底板比標準版寬 4 mm（比 S-Works Recon 登山車鞋寬 8 mm）。
- 44 號重 280 克
S-Works Torch
×
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re... Read More
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re... Read More
S-Works Torch
NT$13,300.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
S-Works Torch Lace
×
The all new S-Works Torch Lace delivers the timeless, refined style of a lace up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be ... Read More
得益於 Body Geometry人體工學科技，全新 S-Works Torch Lace 表現出永恆、精緻的鞋帶風格，並具有前所未有的效率、輕量和舒適。這整體造就了一雙舒適無拘、宛如消失在您足下的車鞋，卻又光芒畢露。
如同我們製造過的每雙車鞋一樣，S-Works Torch Lace 從 Body Geometry 人體工學科技出發 — 發現問題、以設計解決問題、經科學驗證 — 提高舒適度、增進性能，並為每位騎士降低受傷的機率。
舒適度：S-Works Torch Lace 採用我們新型的前足形狀 — 比 S-Works 7 寬 4 mm — 此改進是根據龐大的 3D 足部掃描和 Retül 數據。鞋面整體重新設計了區域分層，可維持非常柔軟的特性和適應不同的腳形，並且在長途騎乘中不會被拉伸，確保了可靠、一致的貼合度。不對稱鞋跟穩定器設計減少了與腳踝硬碰硬的接觸點，並仍提供了通過我們 Human Performance 團隊驗證的膝部穩定性。
效率：每款 Body Geometry 車鞋都最佳化了腳踝、膝蓋和臀部的對齊方式，並透過我們外底向外傾斜 1.5 mm 的 Varus Wedge 內翻楔形專利設計，產生穩定的踩踏迴轉。由於使用輕量的鞋帶固定方式，並且斤斤計較每一克 — 從碳纖外底到鞋面用料 — 42 號 S-Works Torch Lace 僅有如羽毛般輕盈的 200 克。藉由與世界上最強的騎士合作最佳化內部「工字樑」設計，無需增加多餘的重量，碳纖外底即可在強力踩踏時提供絕佳的「硬度/重量」比。
風格：情人眼裡出西施，看對眼的騎士在穿上 S-Works Torch Lace 後，更會對它讚歎不已。S-Works Torch Lace 藉由經典的線條和低調的配色，無論您是在日落之前爬上山峰或競逐終點線，它都讓您覺得舒適無拘。
- 新型鞋面關鍵區域加固，同時提供自適化貼合區域，產生足部無感貼合效果。
- 根據 Retül 足部掃描的收集數據，新底板在拇指球區域比上一代 S-Works 7 寬 4 mm。
- 通過結構最佳化，新型碳纖底板比 S-Works 7 輕 20 克。內部「工字樑」確保了與上一代相同的剛性。
- 利用 Retül 數據更新的鞋楦更加對應騎士的腳形，更高的向外傾角提供舒適、包覆足部的貼合感。
- 不對稱鞋跟穩定器支撐內側，同時削減外側用料，產生較低的鞋領。
- 鞋帶固定方式維持全足個人化貼合調整的自由度。
- 可旋轉鈦合金鎖子螺孔，可使踏板/鎖子位置向後移動 5 mm。三螺栓鎖子設計適合所有主流公路踏板。
- 防滑、可更換的鞋跟底板以平頭螺栓固定以確保安全。
- 約重：200 克（單腳，尺碼 42）
S-Works Torch Lace
NT$11,000.00
The all new S-Works Torch Lace delivers the timeless, refined style of a lace up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen.
Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider.
Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle, and still delivers knee stability validated by our Human Performance team.
Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the light weight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weigh a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world.
Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines, and understated color ways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Laced closure maintains the most opportunity to customize fit along the entire foot.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- Approximate weight: 200g (1/2 pair, Size 42).
得益於 Body Geometry人體工學科技，全新 S-Works Torch Lace 表現出永恆、精緻的鞋帶風格，並具有前所未有的效率、輕量和舒適。這整體造就了一雙舒適無拘、宛如消失在您足下的車鞋，卻又光芒畢露。
如同我們製造過的每雙車鞋一樣，S-Works Torch Lace 從 Body Geometry 人體工學科技出發 — 發現問題、以設計解決問題、經科學驗證 — 提高舒適度、增進性能，並為每位騎士降低受傷的機率。
舒適度：S-Works Torch Lace 採用我們新型的前足形狀 — 比 S-Works 7 寬 4 mm — 此改進是根據龐大的 3D 足部掃描和 Retül 數據。鞋面整體重新設計了區域分層，可維持非常柔軟的特性和適應不同的腳形，並且在長途騎乘中不會被拉伸，確保了可靠、一致的貼合度。不對稱鞋跟穩定器設計減少了與腳踝硬碰硬的接觸點，並仍提供了通過我們 Human Performance 團隊驗證的膝部穩定性。
效率：每款 Body Geometry 車鞋都最佳化了腳踝、膝蓋和臀部的對齊方式，並透過我們外底向外傾斜 1.5 mm 的 Varus Wedge 內翻楔形專利設計，產生穩定的踩踏迴轉。由於使用輕量的鞋帶固定方式，並且斤斤計較每一克 — 從碳纖外底到鞋面用料 — 42 號 S-Works Torch Lace 僅有如羽毛般輕盈的 200 克。藉由與世界上最強的騎士合作最佳化內部「工字樑」設計，無需增加多餘的重量，碳纖外底即可在強力踩踏時提供絕佳的「硬度/重量」比。
風格：情人眼裡出西施，看對眼的騎士在穿上 S-Works Torch Lace 後，更會對它讚歎不已。S-Works Torch Lace 藉由經典的線條和低調的配色，無論您是在日落之前爬上山峰或競逐終點線，它都讓您覺得舒適無拘。
- 新型鞋面關鍵區域加固，同時提供自適化貼合區域，產生足部無感貼合效果。
- 根據 Retül 足部掃描的收集數據，新底板在拇指球區域比上一代 S-Works 7 寬 4 mm。
- 通過結構最佳化，新型碳纖底板比 S-Works 7 輕 20 克。內部「工字樑」確保了與上一代相同的剛性。
- 利用 Retül 數據更新的鞋楦更加對應騎士的腳形，更高的向外傾角提供舒適、包覆足部的貼合感。
- 不對稱鞋跟穩定器支撐內側，同時削減外側用料，產生較低