Subtotal
Taxes are calculated at checkout
Clear Filters
Sort by
Propero 4
×
Meet the all-new Propero 4 helmet—it brings the aero advantages of the S-Works Evade 3 together with the ventilation of S-Works Prevail 3, all with the comfort and confidence Specialized helmets are famous for, earning the highest 5-Star Virgin... Read More
Meet the all-new Propero 4 helmet—it brings the aero advantages of the S-Works Evade 3 together with the ventilation of S-Works Prevail 3, all with the comfort and confidence Specialized helmets are famous for, earning the highest 5-Star Virgin... Read More
Propero 4
NT$6,300.00
Meet the all-new Propero 4 helmet—it brings the aero advantages of the S-Works Evade 3 together with the ventilation of S-Works Prevail 3, all with the comfort and confidence Specialized helmets are famous for, earning the highest 5-Star Virginia Tech® helmet rating. Every detail of the Propero 4 was created with our equation for speed in mind. Aerodynamics + Ventilation + Lightweight = Fast.
AERODYNAMICS: With extensive testing in CFD and in our Win Tunnel, aerodynamics were at the forefront of the Propero 4 development. We took the aerodynamic leading edge from the S-Works Evade 3 and pulled it directly into the Propero 4—which helped it to be four watts, or 15 seconds over 40km, faster than our S-Works Prevail 3.
VENTILATION: Drawing inspiration from our world-renowned S-Works Prevail 3, our goal was not merely to replicate but to elevate. Ventilation became a focal point in our quest for a well-balanced, aerodynamic, and ventilated helmet. We incorporated the rear-end design language of the S-Works Prevail 3 and introduced small 2mm offset micro-channels that create turbulence in the airflow throughout the helmet to help create a continuous, refreshing flow of air.
ATTENTION TO DETAIL: Beyond just aerodynamics and ventilation, the Propero 4 represents meticulous attention to detail. We went the extra mile by incorporating cutting-edge technologies from our S-Works level helmets, like MIPS technology for confidence, and a fit system designed to deliver all-day comfort. The Propero 4 doesn't just meet expectations; it redefines them.
- Mips Evolve Solution is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts.
- Propero 4 earned the highest 5-Star Virginia Tech® Helmet Rating from internationally renowned Virginia Polytechnic Institute and State University.
- FS3 Fit System & Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape, and helmet angle can be adjusted for compatibility with glasses.
- Adjustable Tri-Fix web splitter combined with thin 10mm webbing for increased comfort.
- Dedicated sunglass storage maintains a secure fit and keeps eyewear out of the way when needed.
- Micro Channeling & large rear-end vents for increased ventilation.
- S-Works Evade 3 front-end design language for enhanced Aerodynamics.
- Precision, full-wrap polycarbonate shell for increased durability and premium finish.
Meet the all-new Propero 4 helmet—it brings the aero advantages of the S-Works Evade 3 together with the ventilation of S-Works Prevail 3, all with the comfort and confidence Specialized helmets are famous for, earning the highest 5-Star Virginia Tech® helmet rating. Every detail of the Propero 4 was created with our equation for speed in mind. Aerodynamics + Ventilation + Lightweight = Fast.
AERODYNAMICS: With extensive testing in CFD and in our Win Tunnel, aerodynamics were at the forefront of the Propero 4 development. We took the aerodynamic leading edge from the S-Works Evade 3 and pulled it directly into the Propero 4—which helped it to be four watts, or 15 seconds over 40km, faster than our S-Works Prevail 3.
VENTILATION: Drawing inspiration from our world-renowned S-Works Prevail 3, our goal was not merely to replicate but to elevate. Ventilation became a focal point in our quest for a well-balanced, aerodynamic, and ventilated helmet. We incorporated the rear-end design language of the S-Works Prevail 3 and introduced small 2mm offset micro-channels that create turbulence in the airflow throughout the helmet to help create a continuous, refreshing flow of air.
ATTENTION TO DETAIL: Beyond just aerodynamics and ventilation, the Propero 4 represents meticulous attention to detail. We went the extra mile by incorporating cutting-edge technologies from our S-Works level helmets, like MIPS technology for confidence, and a fit system designed to deliver all-day comfort. The Propero 4 doesn't just meet expectations; it redefines them.
- Mips Evolve Solution is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts.
- Propero 4 earned the highest 5-Star Virginia Tech® Helmet Rating from internationally renowned Virginia Polytechnic Institute and State University.
- FS3 Fit System & Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape, and helmet angle can be adjusted for compatibility with glasses.
- Adjustable Tri-Fix web splitter combined with thin 10mm webbing for increased comfort.
- Dedicated sunglass storage maintains a secure fit and keeps eyewear out of the way when needed.
- Micro Channeling & large rear-end vents for increased ventilation.
- S-Works Evade 3 front-end design language for enhanced Aerodynamics.
- Precision, full-wrap polycarbonate shell for increased durability and premium finish.
Gambit
×
Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive ... Read More
Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive ... Read More
Gambit
NT$7,700.00
Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts.
For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older.
- Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified.
- Tune a more precise, personalized fit thanks to Gambit’s adjustable Integrated Fit System that accommodates variations in head shape and occipital base.
- Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched.
- 4-position adjustable cheek pads provide fit refinement for any head shape.
- Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris.
- Average weight: 640 grams (medium).
- Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit.
- MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability.
- Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed.
- This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.
Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts.
For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older.
- Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified.
- Tune a more precise, personalized fit thanks to Gambit’s adjustable Integrated Fit System that accommodates variations in head shape and occipital base.
- Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched.
- 4-position adjustable cheek pads provide fit refinement for any head shape.
- Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris.
- Average weight: 640 grams (medium).
- Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit.
- MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability.
- Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed.
- This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.
Ambush 2
×
Be so bold in the all-new Ambush 2. Fully redesigned from the buckle up with essential features for next-gen trail riding, the Ambush 2 channels ample ventilation through modern styling, with a superb fit and dialed eyewear integration.
F... Read More
全新的 Ambush 2 沒在跟你客氣。針對下個世代的林道騎乘，Ambush 2 自扣帶以上完全重新設計。藉由現代感造型的風道提供充足通風性，具備出色的貼合性和最佳的風鏡整合性。
- 符合美國 5 歲及以上騎士的 CPSC 自行車安全帽安全標準。
- 尺寸設計帶來高度客製化貼合度和精確調整性。Ambush 2 具有我們的 SBC 整合式貼合 (Integrated Fit) 系統和可調式 Tri-Fix 分帶環，提供最佳的貼合度。
- 使用 Ambush 2 的枕骨基座調整 (Occipital Base Adjustment) 裝置微調您的視野範圍，精確調整安全帽在額頭上的位置，以達到與護目鏡和風鏡無縫整合，讓您在林道上不受限制地擁有寬廣視野。
- 創新的風鏡擺放裝置裝備隱藏式橡膠抵片，可達到穩固、無晃動的貼合收納。當您在長時間爬坡或休息需要暫時脫下風鏡時，可以安全擺放您的風鏡。
- 經電腦計算的流體動力學設計整合了最大體積的內部風道，最佳化通過安全帽的氣流，從頭部帶走熱量。4D 額頭冷卻，在安全帽和額頭之間產生間隙，在各種速度之下，將氣流吸入內部風道。
- 整合式固定帽檐的偏位特點，提供更廣的林道視野，並與風鏡無縫接合。同時有效地引導氣流通過安全帽，達到絕佳的通風性。
- 精密設計最佳化的雙密度 EPS 發泡材料減少體積，並降低多餘的重量。
- Ambush 2 獲得了國際知名的維吉尼亞理工學院暨州立大學頒發的最高 5 星 Virginia Tech® 安全帽評等（Helmet Rating™）。
- 採用 MIPS SL 設計和我們獨有的多孔背襯。在安全帽襯墊中整合的 MIPS 技術，可減低水份滯留性，同時增加透氣度。
- 平均重量：360g（尺寸 M）。
Ambush 2
NT$5,300.00
Be so bold in the all-new Ambush 2. Fully redesigned from the buckle up with essential features for next-gen trail riding, the Ambush 2 channels ample ventilation through modern styling, with a superb fit and dialed eyewear integration.
For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older.
- Sized to drop in with a highly customizable fit and precision adjustment. The Ambush 2 features our SBC Integrated Fit system and adjustable Tri-Fix splitters to provide a dialed fit.
- Fine-tune your vision using the Ambush 2’s Occipital Base Adjustment to precisely adjust how the helmet sits on the brow for seamless integration with goggles and glasses for an unrestricted view down the trail.
- Innovative sunglasses storage with hidden rubber flaps maintains a secure, rattle-free fit, keeping your glasses safely stored when you need to get them out of the way during long climbs or moments of rest.
- Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet, drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed.
- Integrated fixed visor with a breakaway feature provides increased trail vision and a seamless interface with eyewear while effectively channeling airflow through the helmet for superb ventilation.
- Strategically optimized dual-density EPS foam eliminates bulk and reduces excess weight.
- The Ambush 2 earned the highest 5-Star Virginia Tech® Helmet Rating™ from the internationally renowned Virginia Polytechnic Institute and State University.
- Features the MIPS SL solution with our exclusive perforated backing. Integrating MIPS technology within the helmet padding reduces moisture retention while increasing breathability.
- Average weight: 360 grams (medium).
全新的 Ambush 2 沒在跟你客氣。針對下個世代的林道騎乘，Ambush 2 自扣帶以上完全重新設計。藉由現代感造型的風道提供充足通風性，具備出色的貼合性和最佳的風鏡整合性。
- 符合美國 5 歲及以上騎士的 CPSC 自行車安全帽安全標準。
- 尺寸設計帶來高度客製化貼合度和精確調整性。Ambush 2 具有我們的 SBC 整合式貼合 (Integrated Fit) 系統和可調式 Tri-Fix 分帶環，提供最佳的貼合度。
- 使用 Ambush 2 的枕骨基座調整 (Occipital Base Adjustment) 裝置微調您的視野範圍，精確調整安全帽在額頭上的位置，以達到與護目鏡和風鏡無縫整合，讓您在林道上不受限制地擁有寬廣視野。
- 創新的風鏡擺放裝置裝備隱藏式橡膠抵片，可達到穩固、無晃動的貼合收納。當您在長時間爬坡或休息需要暫時脫下風鏡時，可以安全擺放您的風鏡。
- 經電腦計算的流體動力學設計整合了最大體積的內部風道，最佳化通過安全帽的氣流，從頭部帶走熱量。4D 額頭冷卻，在安全帽和額頭之間產生間隙，在各種速度之下，將氣流吸入內部風道。
- 整合式固定帽檐的偏位特點，提供更廣的林道視野，並與風鏡無縫接合。同時有效地引導氣流通過安全帽，達到絕佳的通風性。
- 精密設計最佳化的雙密度 EPS 發泡材料減少體積，並降低多餘的重量。
- Ambush 2 獲得了國際知名的維吉尼亞理工學院暨州立大學頒發的最高 5 星 Virginia Tech® 安全帽評等（Helmet Rating™）。
- 採用 MIPS SL 設計和我們獨有的多孔背襯。在安全帽襯墊中整合的 MIPS 技術，可減低水份滯留性，同時增加透氣度。
- 平均重量：360g（尺寸 M）。
Torch 3.0 Road Shoes
×
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, ... Read More
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, ... Read More
Torch 3.0 Road Shoes
NT$7,300.00
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
- Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
- Standard Fit for support and all-day comfort.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 248g (1/2 pair, Size 42)
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
- Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
- Standard Fit for support and all-day comfort.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 248g (1/2 pair, Size 42)
Recon ADV Shoe
×
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department, but... Read More
外型好，足感好，騎起就會好。這樣的邏輯就跟自行車運動本身一樣恆久不變…這就是新款 Recon ADV 背後的概念，騎乘時足上的風格，就與騎乘本身一樣重要。這款礫石車鞋符合美學上的所有要素，但在長程騎乘時也毫不遜色。Recon ADV 適合重視冒險與騎車時間、並需要一雙在礫石騎乘後還能繼續前進的車鞋的騎士。STRIDE Toe-Flex 技術使 Recon ADV 出色的步行性能成為可能，為下車之後的冒險提供更自然的感覺。
不要被漂亮的外觀所迷惑，這款車鞋從裡到外採用了我們的 Body Geometry 人體工學技術打造，讓您在踏板上成為別人的威脅。在將近二十年研發和科學驗證的推動下，我們確保您的身體與自行車的接觸點沒有疼痛，只有性能。藉由我們創造的 Varus Wedge內翻楔形、Longitudinal Arch縱向足弓支撐和 Metatarsal Button蹠骨鈕，讓您的雙腳在踩踏時保持在最佳位置，並與膝蓋和臀部對正。
- STRIDE Toe-Flex 技術容許更大的腳趾彎曲度，以適應陡峭的斜坡和改善步行能力
- 雷射穿孔鞋面採用超細纖維背襯，達到更佳的吸濕排汗和柔軟觸感
- TPU 防護板可防止石塊撞擊，讓您自信地騎乘或健行
- 浮台產生穩定的踏板平台，同時增進行走的足感
- 鞋底覆蓋更大的 SlipNot 橡膠紋路，最佳化礫石路上的抓地力
- 採用經過驗證如 Varus Wedge 內翻楔形的 Body Geometry 技術，可在騎乘時保持高效舒適的臀部、膝蓋和腳部對正
Recon ADV Shoe
NT$3,990.00
Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department, but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE Toe-Flex Technology, providing a more natural feeling for off-the-bike adventuring.
Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry Technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by science, we ensure there is no pain, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips.
- STRIDE Toe-Flex Technology allows greater toe flex for steep inclines inclines and improved walkability
- Laser perforated upper features microfiber backing for better moisture management and supple feeling
- Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes
- Pontoons create a stable pedal platform as well as aiding walking feel
- Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction
- Features proven Body Geometry Technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding
外型好，足感好，騎起就會好。這樣的邏輯就跟自行車運動本身一樣恆久不變…這就是新款 Recon ADV 背後的概念，騎乘時足上的風格，就與騎乘本身一樣重要。這款礫石車鞋符合美學上的所有要素，但在長程騎乘時也毫不遜色。Recon ADV 適合重視冒險與騎車時間、並需要一雙在礫石騎乘後還能繼續前進的車鞋的騎士。STRIDE Toe-Flex 技術使 Recon ADV 出色的步行性能成為可能，為下車之後的冒險提供更自然的感覺。
不要被漂亮的外觀所迷惑，這款車鞋從裡到外採用了我們的 Body Geometry 人體工學技術打造，讓您在踏板上成為別人的威脅。在將近二十年研發和科學驗證的推動下，我們確保您的身體與自行車的接觸點沒有疼痛，只有性能。藉由我們創造的 Varus Wedge內翻楔形、Longitudinal Arch縱向足弓支撐和 Metatarsal Button蹠骨鈕，讓您的雙腳在踩踏時保持在最佳位置，並與膝蓋和臀部對正。
- STRIDE Toe-Flex 技術容許更大的腳趾彎曲度，以適應陡峭的斜坡和改善步行能力
- 雷射穿孔鞋面採用超細纖維背襯，達到更佳的吸濕排汗和柔軟觸感
- TPU 防護板可防止石塊撞擊，讓您自信地騎乘或健行
- 浮台產生穩定的踏板平台，同時增進行走的足感
- 鞋底覆蓋更大的 SlipNot 橡膠紋路，最佳化礫石路上的抓地力
- 採用經過驗證如 Varus Wedge 內翻楔形的 Body Geometry 技術，可在騎乘時保持高效舒適的臀部、膝蓋和腳部對正
Recon 3.0 Mountain Bike Shoes
×
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficie... Read More
Recon 3.0能夠將我們S-Works Recon的優點–動力傳遞，舒適性，輕巧，時尚–結合，提供XC和礫石路面一個完美的解決方案。從“人體幾何工學”研究開始，Recon 3.0的舒適和高效讓它與眾不同。
您想要加快騎乘速度並且提升越野性能嗎？ Recon 3.0將碳纖維外底與前腳掌部分源自Pavé技術的玻璃纖維配對，創造出STRIDE toe-flex可彎曲技術，當您踩踏時，自然的感覺彷彿像是脫離了自行車，但是仍然提供了令人驚人的動力傳遞效率，雖然硬度指數10.0，但無論是讓您在越野賽道上奔馳，還是騎乘後暢飲啤酒時，STRIDE toe-flex可彎曲技術都是改變遊戲規則的發明。
我們知道，越野意味著對未知事物的冒險，因此Recon 3.0 使用XPEL織面，它提供舒適的貼合性，即便是經過小溪，鞋子仍可保持輕巧快乾。我們的SlipNot橡膠材質鞋底有良好的抓地力，鞋底立體的紋路設計讓泥土不易卡住。
雙L6-Snap旋鈕和前頭部分魔鬼氈開闔設計提供即時微調性，讓您全天候騎乘也保持舒適和高性能表現。無論您的路段是充滿礫石的道路，泥濘的羊腸小徑，或甚至在必要時推車都更方便。
Recon 3.0 Mountain Bike Shoes
NT$7,300.00
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path.
Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pavé-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you’re flying up a run-up on the ‘cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer.
We know venturing off-road means venturing into the unknown, so we’ve given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud.
Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track and even more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA® L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot™ rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 355g (1/2 pair, Size 42)
Recon 3.0能夠將我們S-Works Recon的優點–動力傳遞，舒適性，輕巧，時尚–結合，提供XC和礫石路面一個完美的解決方案。從“人體幾何工學”研究開始，Recon 3.0的舒適和高效讓它與眾不同。
您想要加快騎乘速度並且提升越野性能嗎？ Recon 3.0將碳纖維外底與前腳掌部分源自Pavé技術的玻璃纖維配對，創造出STRIDE toe-flex可彎曲技術，當您踩踏時，自然的感覺彷彿像是脫離了自行車，但是仍然提供了令人驚人的動力傳遞效率，雖然硬度指數10.0，但無論是讓您在越野賽道上奔馳，還是騎乘後暢飲啤酒時，STRIDE toe-flex可彎曲技術都是改變遊戲規則的發明。
我們知道，越野意味著對未知事物的冒險，因此Recon 3.0 使用XPEL織面，它提供舒適的貼合性，即便是經過小溪，鞋子仍可保持輕巧快乾。我們的SlipNot橡膠材質鞋底有良好的抓地力，鞋底立體的紋路設計讓泥土不易卡住。
雙L6-Snap旋鈕和前頭部分魔鬼氈開闔設計提供即時微調性，讓您全天候騎乘也保持舒適和高性能表現。無論您的路段是充滿礫石的道路，泥濘的羊腸小徑，或甚至在必要時推車都更方便。
2FO Roost Clip Mountain Bike Shoes
×
If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get send... Read More
如果您正在尋找一款多功能的登山車鞋，想要它可以在登山車公園裡狂飆，到了山下小鎮啤酒攤都一路暢快的鞋款，那您就不用再找了。2FO Roost Clip骨子裡隨時都準備好帶您在車上飛馳的DNA，營造了隨性、輕鬆的氣場。結合了耐用皮革和紡織鞋面、緩衝EVA泡綿中底與不受拘束的合腳鞋楦，它能經得起日常的殘酷林道越野使用，卻又不失下車行走時的舒適性和外觀風格。最後但同樣重要的一點是，無論是否在林道中，SlipNot™ FG橡膠大底都會給您自信無比的抓地力。
- Body Geometry鞋底結構與鞋墊符合人因工程學設計並經過科學測試，透過最佳化臀部、膝蓋和足部三者間的對齊，達到增強力量、提高效率並減少受傷機率之目的。
- Stiff Lollipop™尼龍複合材料鞋板可產生高效能踩踏與下車行走時的舒適性。
- SlipNot™ FG橡膠大底提供自信無比的抓地力。
- 加長的卡子安裝槽（4mm）便於安裝偏後卡子的選項。
- 合成皮革鞋面為足部提供舒適度，為經久耐用而生。
- 緩衝EVA泡綿中底產生舒適性。
- 不受拘束的合腳鞋楦在車上踩踏的足感與下車牽行的舒適性之間取得平衡。
- 雙螺栓鎖固卡子設計適合所有主流登山車卡踏。
- 重量：約367克（單支，尺碼42）
2FO Roost Clip Mountain Bike Shoes
NT$4,200.00
If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Clip brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a SlipNot™ FG rubber sole delivers confident traction on and off the trail.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- Stiff Lollipop™ nylon composite plate for high performance pedaling and off-the-bike comfort.
- SlipNot™ FG rubber sole for confident traction.
- Extended length cleat slot (4mm) for rearward cleat set up option.
- Synthetic leather upper conforms to the foot and is built to last.
- Cushioned EVA foam midsole for comfort
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- Two-bolt cleat pattern fits all major mountain pedals.
- Approximate weight: 367g (1/2 pair, Size 42)
如果您正在尋找一款多功能的登山車鞋，想要它可以在登山車公園裡狂飆，到了山下小鎮啤酒攤都一路暢快的鞋款，那您就不用再找了。2FO Roost Clip骨子裡隨時都準備好帶您在車上飛馳的DNA，營造了隨性、輕鬆的氣場。結合了耐用皮革和紡織鞋面、緩衝EVA泡綿中底與不受拘束的合腳鞋楦，它能經得起日常的殘酷林道越野使用，卻又不失下車行走時的舒適性和外觀風格。最後但同樣重要的一點是，無論是否在林道中，SlipNot™ FG橡膠大底都會給您自信無比的抓地力。
- Body Geometry鞋底結構與鞋墊符合人因工程學設計並經過科學測試，透過最佳化臀部、膝蓋和足部三者間的對齊，達到增強力量、提高效率並減少受傷機率之目的。
- Stiff Lollipop™尼龍複合材料鞋板可產生高效能踩踏與下車行走時的舒適性。
- SlipNot™ FG橡膠大底提供自信無比的抓地力。
- 加長的卡子安裝槽（4mm）便於安裝偏後卡子的選項。
- 合成皮革鞋面為足部提供舒適度，為經久耐用而生。
- 緩衝EVA泡綿中底產生舒適性。
- 不受拘束的合腳鞋楦在車上踩踏的足感與下車牽行的舒適性之間取得平衡。
- 雙螺栓鎖固卡子設計適合所有主流登山車卡踏。
- 重量：約367克（單支，尺碼42）
2FO Method Shoe
×
The 2FO Method melds unmatched pedal grip of our SlipNot compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish... Read More
The 2FO Method melds unmatched pedal grip of our SlipNot compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish... Read More
2FO Method Shoe
NT$3,100.00
The 2FO Method melds unmatched pedal grip of our SlipNot compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike.
- UNMATCHED GRIP: SlipNot rubber outsole offers unmatched traction, grip, and pedal feel.
- STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel.
- COMFORT: canvas upper offers ruggedness and breathability.
- PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning.
- STEALTHY SUPPORT: Internal heel counter adds support without bulk.
- BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
The 2FO Method melds unmatched pedal grip of our SlipNot compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike.
- UNMATCHED GRIP: SlipNot rubber outsole offers unmatched traction, grip, and pedal feel.
- STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel.
- COMFORT: canvas upper offers ruggedness and breathability.
- PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning.
- STEALTHY SUPPORT: Internal heel counter adds support without bulk.
- BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
2FO DH Flat Mountain Bike Shoes
×
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champi... Read More
2FO DH Flat的核心就是要讓您更快，並抓住任何機會。幾乎垂直的小徑？沒問題！巨大的亂石區？來吧！深不可測的落差跳耀？就放手去吧！在世界一流的DH騎士和三屆衛冕世界冠軍的Loic Bruni幫助下開發的全新鞋款，具有適當的保護性、踏板抓握和風格質感，給您十足信心。最後！新的SlipNot™FG橡膠鞋底在遇到任何麻煩時，可提供一流的踏板抓握品質。這絕對是高速時面對困難路段時的最佳鞋款。
- 我們有目的性的打造鞋款，得到科學的支持。我們的Body Geometry人體工學「縱足弓支撐」、「蹠骨墊」和「內翻楔形」組合共同提高了效率，優化臀部、膝蓋和足部的穩定並降低受傷風險。
- 強化的上方結構可以保護足部並自信的站在最險峻的地形上。
- SlipNot™ST橡膠鞋底提供平踏板良好抓握表現。
- XPEL™疏水性網眼結構可減少吸水，並顯著改善乾燥時間。
- 皮面和紡織鞋面提供額外的保護，讓您保持騎乘時的舒適並耐用。
- 搭配襯墊的EVA發泡中底提供舒適性和吸收衝擊，緩衝同時也提供穩定性。
- 輕鬆合穿的踩踏感受，讓踩踏與日常穿搭都能達到平衡。
- 參考重量：395.9克
2FO DH Flat Mountain Bike Shoes
NT$5,200.00
The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot™ ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly.
- Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks.
- Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence.
- SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection.
- XPEL™ hydrophobic mesh construction reduces water absorption and dramatically improves drying time.
- Leather and textile upper with added protection keeps you comfortable and is built to last.
- Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability.
- Relaxed Fit last for a balance of pedal feel and off-the-bike comfort.
- Approximate weight: 395.9 grams
2FO DH Flat的核心就是要讓您更快，並抓住任何機會。幾乎垂直的小徑？沒問題！巨大的亂石區？來吧！深不可測的落差跳耀？就放手去吧！在世界一流的DH騎士和三屆衛冕世界冠軍的Loic Bruni幫助下開發的全新鞋款，具有適當的保護性、踏板抓握和風格質感，給您十足信心。最後！新的SlipNot™FG橡膠鞋底在遇到任何麻煩時，可提供一流的踏板抓握品質。這絕對是高速時面對困難路段時的最佳鞋款。
- 我們有目的性的打造鞋款，得到科學的支持。我們的Body Geometry人體工學「縱足弓支撐」、「蹠骨墊」和「內翻楔形」組合共同提高了效率，優化臀部、膝蓋和足部的穩定並降低受傷風險。
- 強化的上方結構可以保護足部並自信的站在最險峻的地形上。
- SlipNot™ST橡膠鞋底提供平踏板良好抓握表現。
- XPEL™疏水性網眼結構可減少吸水，並顯著改善乾燥時間。
- 皮面和紡織鞋面提供額外的保護，讓您保持騎乘時的舒適並耐用。
- 搭配襯墊的EVA發泡中底提供舒適性和吸收衝擊，緩衝同時也提供穩定性。
- 輕鬆合穿的踩踏感受，讓踩踏與日常穿搭都能達到平衡。
- 參考重量：395.9克